Rotary Screw

CL series

CL series

Direct coupled, without v-belt or gearbox, reduces transmission losses to a minimum. The compact design lends itself to the following configurations: • A foot mounted compressed air station • A receiver mounted compressed air station • A compressed air centre comprising of, a compressor and refrigerant dryer, mounted on a horizontal receiver. Heat recovery: CL series compressors are available with heat exchanger for waste heat recovery. Effective FAD: 0,234 - 2,240 m3/min 8 - 79 cfm Presure range: 10 und 13 bar 150 und 190 psig Rated power: 2,2 - 15 kW 3 - 20 PS

More Details...

 

Enquire Now!
SL series

SL series

SL series with direct drive The SL series of screw compressors are direct coupled - therefore transmission losses are virtually eliminated. The SL series is a logical extension of the range to complement the S series and utilises the standard modular build system: - Airend - BOGE control and monitoring system The increased output and significantly lower power used by the drive motor allows the SL series to operate economically, even at reduced pressure. The SL series offers all the options offered in the S series and is therefore flexible enough to adjust to individual operating conditions. Direct coupled airend - The most economical way to produce compressed air BOGE control, regulating and monitoring system - customised, adaptable, economical, reliable Divided into three clearly defined sections - easy access to all components BOGE airend with state-of-the-art optimum performance screw profile - small specific power requirement, greater economy Dynamic, fail-safe intake controller - designed for proportional regulation as standard Small warm air section, complete autonomous cooling unit - compressor can also operate with the cabinet open for testing or maintenance purposes Soundproofed lining in robust, nylon laminated mineral fibre mat - very good soundproofing, oil repellent, washable Valve-less oil circuit with no oil-stop valve and no check valve - high reliability Vibration damped base and sub-frame - reduced transmission of structure-borne sound Torsionally rigid, sealed, base frame - for easy transport with a pallet truck or forklift truck Horizontally mounted combi-tank, multiple oil pre-separation, fast de-aeration and low foam formation - low residual oil content of only 1-3 mg/m3 in every operating phase DIN and VDE switch cabinets, protected to IP 54 - clearly laid out and protected against ingress of dust and dirt Three-phase ISO class F asynchronous motor - additional motor reserves for difficult operating conditions, long service life due to position in the cold air intake area, as well as thermistor protection. FAD: 33,0 - 43,7 m3/min 1166 - 1544 cfm Pressure range: 8 - 13 bar 115 - 190 psig Motor range: 200 - 355 kW 270 - 480 HP

More Details...

 

Enquire Now!
Quincy QGS

Quincy QGS

• 5-15 hp, Belt Drive • 16-45 acfm, 145 psig • 62-68 dBA • 60/120 gal tank-mount standard • Integrated dryer option

More Details...

 

Enquire Now!
Quincy QGD

Quincy QGD

• 20-50 hp, Direct Drive • 90-226 acfm, 100-150 psig • Expandable PLC Control • Ease-of-maintenance design • Industrial-grade enclosure Includes a 10 year Royal Blue Warranty

More Details...

 

Enquire Now!
Quincy QSF

Quincy QSF

• 50-200 hp, Gear-Drive • 238-998 acfm, 100-150 psig • Operate in temps up to 118ºF • Standard electronic control • Ideal for heat recovery ducting

More Details...

 

Enquire Now!
Quincy QGV

Quincy QGV

20-200 hp, Direct Drive 14.3-998 acfm, 75-150 psig Variable speed-85% turndown Very low power consumption Includes a 10 year Royal Blue Warranty

More Details...

 

Enquire Now!
Quincy QSI

Quincy QSI

50 - 350 hp, Direct Drive 243-1500 acfm, 100-150 psig Low specific power saves money Includes a 10 year Royal Blue Warranty

More Details...

 

Enquire Now!
Quincy QS2

Quincy QS2

400-500 hp, Direct Drive 2230-2670 acfm, 100-125 psig Two-stage, variable displacement Standard Powersync Control Air or water cooled design

More Details...

 

Enquire Now!
Quincy QSLP Low pressure Rotary Screw

Quincy QSLP Low pressure Rotary Screw

10-200 hp, Direct Drive 88-1521 acfm, 30-40 psig Low pressure applications Most efficient at 7 cfm/hp Clean - only 2-3 ppm carryover

More Details...

 

Enquire Now!
Copyright © Fatweb and Web Design, 2016